References

KG Knutsson

The K.G. Knutsson AB trading company is a Swedish wholesaler, focusing on the automotive industry and marine accessories, which was founded in 1946.

KGK is active in all of Scandinavia with a number of well-known brands in its the assortment and it sells products primarily via a dealer network, in which the majority of the stores in the Autoexperten distribution chain are part of the KGK Group.

The background to KGK Transmission's investment in vertical storage lifts is that all the materials for service and repair of transmission are handled in racks and mezzanines. This management method results in a poor use of the premises' space, relatively many balance errors and, above all, a long processing time.

With Compact Lift vertical storage lifts and Compact Store WMS from Weland Lagersystem, the efficiency is improved in several ways;there is both a much greater certainty in the balance and, simultaneously, shorter lead times for repairs.

Product:

Compact Lift

Customisations:

Optimisation:

Premould

Premould manufactures tool and plastic parts in varying series. They stock a great many tools and so, good order, rational handling and clean and protected storage is important. The vertical storage lift stores approx. 500 tools. The vertical storage lift has 100% pull-out for the load trays, so the tools can be handled easily with an overhead crane.

By placing a Compact Lift in a “tower” outside the premises, Premould in Huskvarna has increased the storage capacity in a smart way and freed up space on the premises. Moreover, they have installed a frame in the tower for a further vertical storage lift in the future. This will considerably ease the assembly when a further lift is to be installed. The service opening in the wall is ready-to-use and temporarily closed off, to ensure minimal disruption during future installation.

Product:

Compact Lift

Customisations:

Optimisation:

Theofils

Theofils handyman stores in Jönköping, Stockholm, Gothenburg and Malmö have a product range exceeding 9,000 articles, with a focus on furniture fittings.

When it was time to rebuild the company's warehouse in Jönköping, Compact Vertical Storage Lifts were the solution for increasing handling efficiency without any need to expand into larger premises.

After raising the roof to make it possible to fit in higher storage lifts, 2 Compact Twins and 2 Compact Lifts were installed with load trays suitable for up to 500 kg. 2,500 of the company's articles are now managed in the vertical storage lifts and they can serve the stores with daily deliveries. This results in good local service for the market, without the need for larger stocks in the stores.

Product:

Compact Lift Compact Twin

Customisations:

Optimisation:

Rolls-Royce

Rolls-Royce has a leading position in the marine market, with products and systems for commercial and military customers.

At the Automation Department, in Longva in Norway, ergonomic automation systems are designed for the control and monitoring of equipment and machinery for ships. Complying with requirements for high levels of service, operational reliability and good quality, seven vertical storage lifts 5 metres high and occupying 32 square metres have been installed, which has resulted in an optimally organised area. A shelf system for storage of small goods would have required at least 250m2 storage area.

Product:

Compact Lift

Customisations:

Optimisation:

BrightStar

Brightstar is the No. 1 specialised wireless distributor in the world and a leader in innovation and diversified services for the wireless industry.

Brightstar distributes mobile phones and other wireless devices, serving more than 200 operators in more than 50 countries, including global distribution for Motorola, Blackberry, Apple, HTC, LG and Samsung

Weland Lagersystem has supplied 4 Compact Twin vertical storage lifts, equipped with double service openings allowing picking and filling from different sides, for Brightstar's distribution centre in north of Stockholm, Sweden. The vertical storage lifts are controlled by our WMS Compact Store. In addition to this, Weland has supplied pallet racks with space for approximately 7000 pallets, of which 400 are equipped with pull-out units for picking any medium-frequency goods.

Product:

Compact Twin

Customisations:

Optimisation:

Ur&Penn

Ur&Penn currently has more than 100 shops, 550 employees and a market share close to 30%. Geographically, the shops are spread from Kiruna in the north to Malmö in the south and their first shop in Finland opened in 2011.

With vertical storage lifts, WMS and a total solution from Weland Lagersystem, these shops are served by a batch picking/put-to-light solution and the facility performs approximately 1100 order rows per hour, when the picking demand is at its greatest. This is achieved by searching correctly on picking hits, both at the storage location level and the article number level, with the help of our WMS system Compact Store.

Product:

Compact Twin

Customisations:

Optimisation:

Bring Logistics Solutions

Bring Logistics Solutions' four Compact Twin units are a good example of how you can choose a colour that matches your company's profile.

They use the vertical storage lifts for their third-party solution, with enormous volumes of despatches from their central warehouse in Jönköping. The system supplier, NYCE Solutions AB, was pleasantly surprised by how easy it was to integrate the vertical storage lifts with the existing WMS.

Product:

Compact Twin

Customisations:

Optimisation:

Jensen-Group

JENSEN-GROUP, with production facilities in Europe and the USA, is the world leader in industrial laundry equipment.

Their unit in Borås in Sweden specialises in equipment for sorting workwear. The company sells completely automated systems for sorting clothing after washing, with identification of every hanger.

A Compact Lift, via connection to the Microsoft Dynamics AX business system, receives picking orders for supplying production with components stored in the vertical storage lift. At the same time as it saves a lot of space, this new version Compact Lift makes a clean and smart impression in the modern production environment.

Product:

Compact Lift

Customisations:

Optimisation:

Ljungby Maskin

Ljungby Maskin manufactures high quality loaders with reliable basic design, high comfort and great flexibility in use.

The company has eight Compact Lift units for managing its entire stock of spare parts. The vertical storage lifts create good order and control for stock handling. Furthermore, by extracting a balance via the business system Monitor, the spare part inventory is finished very quickly. Thanks to the equipment being so flexible, they have succeeded in reusing both pallet collars and plastic boxes from previous stores in the vertical storage lift, resulting in considerable savings.

Product:

Compact Lift

Customisations:

Optimisation:

Gekås in Ullared

Gekås in Ullared, with more than 35,000 square metres of store area, is Scandinavia's largest department store and also Sweden's largest tourist attraction, with four and a half million visitors every year.

The size of the business places high requirements on efficient logistics and intelligent warehouse management solutions. To facilitate working with large volumes of films and computer games, a Compact Twin has been installed which towers over several floors. Films and games are loaded into the vertical storage lift on the top floor and are picked out at store level, on the floor below. The result is faster, more efficient handling, with considerably less manual work.

Product:

Compact Twin

Customisations:

TePe Munhygienprodukter

TePe Munhygienprodukter in Malmö manufactures, among other things, 11 million toothbrushes a year.

To cope with increased volumes, the production of toothbrushes has been moved to new premises designed for an improved flow. The store for the raw materials and semi-finished goods is placed next to toothbrush production and in between stands a Compact Lift.

The vertical storage lift is filled from the store side, and in the production area the operators fetch components according to an order specification. This saves time, since the operators don't need to look for parts in the store and the truck drivers, on the other side of the wall, can concentrate on handling the goods without any risk of incidents.

Product:

Compact Lift

Customisations:

Optimisation:

Tata Steel in Halmstad

Tata Steel delivers steel solutions to the construction and machine engineering sector, the car industry, the packaging industry, and other markets all over the world. Tata Steel also counts among the ten largest steel producers in the world.

The facility in Halmstad handles thin metal sheeting on 2,800-mm-wide loading pallets. The pallets are loaded with a forklift truck on one of the lift's sides and handled manually in the other opening. Customers order here sheet metal of a desired format and colour which is subsequently shaped in close proximity to the vertical storage lift.

The sheet metal that is not processed is returned and stored in the Compact Lift vertical storage lift.

Product:

Compact Lift

Optimisation:

Svenstigs in Värnamo

Svenstigs Bil is the authorised dealer of Audi, Volkswagen and Skoda passenger cars, Volkswagen mini vans and Scania lorries. They are represented in three locations in Småland with two sales and three service facilities.

The majority of the small spare parts are stored in a Compact vertical storage lift linked to WMS Compact Store, which ensures precise stock balance, good ergonomics, speed and saves a lot of room.

Product:

Compact Twin

Customisations:

Sundahls Maskin in Växjö

Sundahls Maskinaffär is one of Sweden's largest private machine traders in construction, forestry, agricultural and park machinery. The company's headquarters are in Växjö, with an additional branch in Karlskrona.

Both facilities have a spare parts warehouse, service workshop, and machinery sales shop. Service in the field is provided by the company's 9 field mechanics and their service vehicles. A large part of the small details in Växjö are stored in a Compact Twin that provides quick and exact picks, control of the warehouse, and good safety and health.

Product:

Compact Twin

Customisations:

Optimisation:

SP Maskiner in Ljungby

In 1980, SP designed and built the world's first single-grip harvester head, SP21, which eventually led to a revolution in the professional forestry industry. SP Maskiner is currently the leading manufacturer of forestry machinery harvester heads, with a market all over the world.

SP Maskiner has a Compact Twin with double openings that allows two operators to work simultaneously. They also have a Compact Lift for small details for both production and spare parts management. This has made available large areas and created order in the management.

Product:

Compact LIFT Compact TWIN

Customisations:

Getinge AB in Växjö

Getinge Disinfection in Växjö has developed its stock handling using Compact Lift.

The first vertical storage lift was installed in 2009, and in 2014 this was moved and supplemented with two new Compact Lifts. At the same time, they connected their Movex ERP system to the Compact Store WMS system in order to further increase the efficiency of picking from the store.

Product:

Compact LIFT

Customisations:

Garo AB in Gnosjö

GARO AB is the parent company of the GARO Group and is in charge of the business areas of electric installation and systems.

Electric installation comprises DIN rail components, meter cabinets with distribution panels and blocks, power outlets for car parks, switchgear, CEE sockets, etc. The Systems business area specialises in marine power outlets, camping and comprehensive charging equipment solutions. The greater efficiency and place-saving made the investment in a Compact Vertical Storage Lift an obvious choice for Garo.

Product:

Compact Lift

Customisations:

Optimisation:

Cart

  • Your cart is empty